Product overview
AVID POWER ACD316 20V Drill Set: What to Know
The current catalog identifies this red AVID POWER drill set by ASIN B07CR1GPBQ, and the ASIN-linked operator manual maps it to the ACD316 model family. The listing specifies variable speed from 0 to 550 RPM, a 15+1 clutch, and seller-rated maximum torque of 280 inch-pounds. TopFiveFind has not measured output torque, speed under load, stall behavior, heat, or runtime, so those values remain published specifications rather than test results.
A 3/8-inch keyless chuck supports tool-free bit changes, while the adjustable clutch is intended to limit driving force for different screws and materials. The listing describes drilling in wood, drywall, plastic, and suitable metal, with stated limits of 13/16 inch in wood and 3/8 inch in steel plate. It also explicitly says the drill is not for concrete or masonry walls and is not suitable for drill bits larger than 25 millimetres.
The drill is listed at approximately 2.5 pounds with a rubberized grip and built-in LED for dark work areas. Current catalog dimensions of roughly 8.66 by 3.15 by 9.65 inches and a 3.65-pound weight appear to describe the broader listed product rather than clearly documented bare-tool measurements. Buyers should confirm actual grip fit, battery clearance, chuck capacity, storage dimensions, and working weight on the current offer.
The lithium-ion battery is listed at 1.5 amp-hours and includes a real-time level display. Product copy warns that this drill should use only its designated AVID POWER battery and specifically says not to substitute another brand or a larger-capacity pack. The available model record describes a three-to-five-hour charge window, but the delivered battery label, charger input and output, plug, charge indicators, storage interval, and replacement compatibility should control.
The kit lists ten drill bits, ten driver bits, a flexible shaft, and an extension bar, alongside the drill, battery, charger, and documentation. The ACD316 manual further describes five wood bits and five high-speed-steel metal bits. Accessory count does not prove suitability for every material or fastener; inspect each size and rating, secure the work, use eye protection, remove the battery before chuck or maintenance work, and confirm current warranty and support terms.
Key Listed Features
Variable-speed ACD316 drill/driver with a listed range from 0 to 550 RPM
Fifteen clutch settings plus drill mode and a seller-rated maximum of 280 inch-pounds
Three-eighths-inch keyless chuck, rubberized grip, built-in LED, and compact form
Lithium-ion battery with a real-time charge display and model-specific compatibility warning
Ten drill bits, ten driver bits, flexible shaft, extension bar, charger, and documentation
Product image from current catalog data


